When choosing a rack or a cabinet, we will consider many aspects, such as the quality, price, brand and effectiveness of the rack and the cabinet, which are all we need to consider. It is for these many reasons that we should choose the right one for each company based on the specific situation. If some small companies have relatively few funds, it is necessary to select products with lower prices, but also to use brands that meet the needs of the company. The company specializes in the sale of custom-made monopoly distribution shelves, cloth cabinets, file shelves, file cabinets, smart cloth racks, smart cloth cabinets, electric cloth racks, electric cloth cabinets, accounting documents The cabinet, the medical record is full of cabinets, and the semi-enclosed (fully enclosed) is full of cabinets. The company has passed the ISO9001-2000 international quality management system certification manual (hand-cranked) full frame, manual (hand-cranked) full cabinet, stainless steel cloth cabinet (Full frame), covered with basement cabinet, smart table library full of cabinets, mobile shelves, bookshelves, the company adheres to the principle of factory direct sales, lowest price, quality assurance, package replacement and replacement, to provide you with high quality and thoughtful effect. The main products include manual cabinets, file cabinet series, bookshelf series, file cabinets, locker series, safes, student beds, and treasury doors. Since its establishment more than 20 years ago, it has become the largest production base for the full frame in the north. It has been identified by the China Archives Society and a number of local archives bureaus as the designated enterprises for archives. 1. It is forbidden to use a power supply that does not meet the extra voltage.
2. Strictly operate according to the training requirements of the company, and the processing scale shall not exceed the scale of the manual of the carving machine.
3, the carving machine prohibits super strength, overload work!
4. After the finishing of the screw-spinning machine of 1224 or above, the gantry should be parked in the center position to avoid the natural drooping of the screw and affect the concentricity and precision of the machine.
5, if the machine presents smoke, announce abnormalities, noise and other abnormal conditions, please do not use
6, forbidden to wear gloves.
7. Do not use corrosive liquids to clean the engraved machine parts and keyboard.
8, according to different carving materials and carving depth, select the appropriate tool, and set the appropriate feed speed.
9. The spindle should be turned before the Z-axis positioning and the engraving output of the good tool.
10, no damage or random replacement of the original power cord, do not exercise excessive twists and turns of the power cord, strong pull, binding and pressing under heavy objects.
11. Do not touch the tool and the main part with your hands during the machine operation.
12, the machine can not seep into the liquid, drop into the metal objects, etc., each time the carving is completed, the machine should be sorted out in time to remove the cuttings and dust, and regularly lubricate the lead bar of the lead bar.
13. When the carving machine is working, the bucket of the water pump should be covered to prevent the debris from falling into the water and blocking the water pipe and the main shaft.
14. When the water-cooled spindle motor is working, it is necessary to ensure that the water pipe is firmly fixed, the water source is clean, and the water flow is dredged. Otherwise, the motor is damaged due to water leakage or water cut, and the water pipe should be replaced after aging. The coolant can be emulsion or 10# mechanical oil.
15. Before the engine, the spindle motor should be started to check whether the rotation direction is rotating. If the rotation direction is wrong, turn off the power supply and interchange the orientation of any two wires on the UVW column on the inverter. The motor is prohibited from rotating. .industry.