It should be caused by the aging of the motor cable, it should be the disconnection of the cable; it is also possible that the motor is aging.
Advertising engraving machine head lifting Caton?
1. Check if the motor cable is aging. If it is aging, replace it with a new one.
2, check the motor, combined with the number of years, need to replace the new motor.
The harm of advertising engraving machine head lifting Caton?
The advertising engraving machine head lifts the Caton delay, so it needs to be solved in time.
What are the factors that affect the processing of advertising engraving?
1. The influence of the power supply of the advertising engraving machine on the processing is the most direct, mainly manifested by the disorder of the control system. Each electronic device and each functional component of the CNC control system has a certain voltage and frequency range. The overload operation of any component inevitably leads to instability of the entire system. A common phenomenon is machining offset.
2. The influence of the vibration of the advertising engraving machine is reflected in the frequent broken knife and the surface is not smooth. The common reason is that the machine is touched during the machining process, the level of machine installation is unqualified, and there is a punch around.
3, the advertising engraving machine generally does not appear the tool collapse and the broken edge caused the engraving surface is not smooth, there are jagged phenomena. It is found that the engraved surface is not smooth and has a jagged phenomenon. It should be checked whether the model size of the knives used is suitable. If the shank is extended too long, the knives will be deformed at the processing time, which will result in a machined surface. Not smooth and jagged.
4, the advertising engraving machine ambient temperature and humidity mainly affect the performance of the control system, the performance of the drive motor. When the ambient temperature exceeds 40 degrees, the control system may have erroneous control, and the driving torque of the drive motor may not reach the rated value.